STRONGER echo sounder transducer mount. We receive questions regarding our new development, namely the echo sounder transducer position controller. We are pleased that you are interested in our products. It is the most important for us to be useful! We are ready to answer the most popular questions and so let’s start… https://strongermarine.com/ru/product_category/regulators/

1. What is the purpose of the echo sounder transducer mount – aka STRONGER automatic regulator. After all, you can do without it, if you attach the transducer directly to the transom of the boat. What is the difference, because the device will show information on the screen.

Answer: For experience fishermen obvious circumstance that for the receipt of exact information a signal from transducer must be reflected from the bottom of reservoir without distortions. Thus a ray is sent and accepted transducer must be perpendicular to the bottom. Because exactly at such variant we can look after the veritable and integral picture of what be going on a day reservoir. Obtaining it is possible only by one method by regulation of corner of position of transducer. There is not sense in acquisition of expensive sonic depth finders if we can not observe this most important rule that is described in instruction on the use of practically every producer of sonic depth finders. Whom a not secret is not for, that position of transducer can not be static. We it admits, when a boat is on water in the mode of drift, this first position of inclination of transducer, if a boat moves fast not in the searching mode, this second position, if a boat moves in the mode of troll this third position. Motion of boat on speed is this fourth position. And here all is another no less important factor is this amount of load and place of his placing in a boat. As we see, great number of factors influence on the changes of angle of slope of transducer. Our device is intended for adjustment exactly of these factors.

2. What is included with the product “echo sounder sensor mount” – regulator and what is included separately with the control panel?

Answer: a regulator, cables for a management and energising, management button, roofing timbers, instruction, warranty sheet, is included In a standard delivery of regulator set. In a delivery of control stand set included, control panel, comptroller, cables for a management and energising, instruction, warranty sheet.

3. Is it possible to control the regulator “echo sounder sensor mount” while the boat is moving?

Answer: The use of the governor is limited by the boat speed. For each version of the controller (PRO and LITE) the maximum speed is different. This is due to the fact that when using elongated versions of the transducer, its entire area rests on the water and works like a transom plate. The actuator used in the device is not designed for such huge loads. Therefore, to travel long distances at high speed, we recommend lifting the transducer out of the water by pressing the up key on the panel or on the device control button.

4. How long did it take to test the “echo sounder sensor mount” – regulator on the water in real conditions and what are the results on the reliability of the device?

Answer: This device exactly year tested on water. For this time, we brought in the row of changes in work of the management program. We picked up the optimal angles of slope of transducer. What his work was maximally adapted under different terms that were enumerated in our answers ан questions are higher. In respect of mechanical part, a that device declared oneself from the best side and worked all this time without censures.

5. Is it possible to control two “echo sounder sensor mount” – regulators at once with one control panel?

Answer: Yes, it maybe. In this case, two regulators will work synchronously. And it will decrease your budget in turn, will save additionally a place on the panel of devices. Well and most important your devices will be exact in the testimonies!

6. On my device panel there is not a place for placing of your control panel. How to be in this situation?

Answer: In the near time, we will produce a cantilever for editing, that it will be possible will accommodate in any a friend comfortable place up to overhead part of panel cutter.

7. What material are the “echo sounder sensor mount” – regulators made of?

Answer: Regulators are made from stainless steel. Part of details additionally covered by the special powder-like paint.

8. Is it needed to conduct some maintenance of regulator?

Answer: This device is absolutely autonomous and the special service does not require. As recommendation it is possible half-year to untwist the overhead lid of device and simply to clean the inside of device from garbage.

Perhaps, we answered on questions that set us on this device are most frequent. If you have other questions, we are always ready on them to answer. We hope that after the given answers, less than questions became, and understanding why this device is needed became anymore.

9. The control panel in my case will be fixed to the instrument console. What is the protection of the control panel? After all, it will get water on it, it can be rain or snow…..

Answer: The panel is not afraid of any atmospheric precipitation, as its upper part is completely sealed. During tests, sometimes, the control panel was completely placed under water. In this case everything worked correctly and without any problems.

10. Is it possible to use the “echosounder sensor mount” – regulator in winter at sub-zero temperature?

Answer: In case if the outside temperature is below zero degrees, it is forbidden to use the device! In this case the device is lowered to the lower working position without the possibility of adjustment.

Perhaps, we have answered the most frequent questions we are asked about this device. If you have other questions, we are always ready to answer them. We hope that after the provided answers, there are less questions and more understanding of why you need this device… https://www.youtube.com/watch?v=e5geITGL4CY&t=17s