Steel Hands 20

Steel Hands 20
Steel Hands 20
Steel Hands 20
Steel Hands 20
Steel Hands 20
Steel Hands 20
Steel Hands 20
Steel Hands 20


The anchor winch SH 20 is designed for installation on inflatable boats up to 4 meters long. An anchor rope with a length of 30 meters with a thickness of 3.5 mm and wound on the winch coil is supplied with the winch. The breaking load of the anchor rope is 360 kg. The winch cover is made of a durable ABC plastic which is not afraid of the effects of ultraviolet rays, as well as sudden temperature changes. The complete set includes a roulette, fasteners, power cable and warranty card for a period of 1 year. Details of the winch mechanism are made of durable steel with galvanic coating.

The winch has a quiet working mechanism. In this model, in contrast to the SH 35 PRO model, there is no “smooth entry function of the anchor in the water”. When the anchor reset button is pressed, the anchor leaves the roll and in free fall rushes into the water. Thanks to the “free anchor reset” function, within a few seconds it reaches the bottom.

The entire mechanism of the anchor winch is implemented mechanically, which significantly increases the reliability of the mechanism and, in general, the winch itself. The anchor winch SH 20 has a motor with a power of 80 watts. For correct operation of the anchor winch, the recommended weight range for anchors is (11-18 LB) (5-8 kg). To date, the STRONGER anchor winches are the quietest rope anchor winches that have the function of free anchoring.

Для коректної роботи якірної лебідки рекомендований діапазон ваги якорів становить (11-18 LB) (5-8 кг). На сьогоднішній день якірні лебідки STRONGER є найбільш тихими в роботі канатними якірними лебідками, які мають функцію вільного скидання якоря.

Technical description and configuration

Housing winch

Housing winches, as well as all mounting brackets , made ​​of solid steel.

Winch mechanism

Winch mechanism consists of a gear mechanism gated svobonogo reset mechanism and the armature coil winding anchor line.

Electric equipment

The electric part of the winch uses an 80 W motor with an operating voltage of 12 V. Non-locking three-position dump-proof knob is installed on the cover. Wire of 5 m long for winch connection is included into the winch set as well as a thermal safety relay.

Winch cover

The lid of winch is executed from a durable plastic. On the lid of winch the management button is located by a winch.


Winch cover is made from stainless steel and contains a control knob.

Anchor rope

Nylon rope winch is provided with a diameter of 3.5 mm and a length of 30 m and a tensile force of 360 kg.


The winch mounting kit supplied galvanized bolts and nuts for mounting the winch housing and the roller.


The item has a warranty document that confirms warranty period 1 year.


Winch and mounting on an inflatable boat packed in a sturdy cardboard shipping.


For correct and durable work of the winch, we recommend using STRONGER anchors! Anchor winch includes a roller and the winch itself. Using the anchor winch is prohibited without regular roller!


Maximum anchor weight *
8 kg
Boat length, up to
4 m
Anchor rope
∅ 3,5 mm, length 30 m
Control button
Function buttons
ascent / descent
Rod for safe transport anchors
The function of a smooth entry of the anchor into the water
Free discharge armature
The rate of rise of the armature
20 m/min
Amount in a package
1 PC
The weight
9 kg
Package dimensions (LxWxH)
377х307х177 mm
Winch Dimensions (LxWxH)
250,5х260,5х130 мм
Roller Dimensions (LxWxH)
260x82x129 mm
Model number
SH – 20
1 year
Max. Working load
90 kg
← Go back